Options pack F 45 II: Motorised settings save time.

The motorised rip fence is the highlight of this package. Since the rip fence is controlled directly from the central operating position, there’s no need to run round to the other side of the machine and back – so it saves you time. Enter the cutting width using the keypad on the control panel on the machine frame, press the start button, and the rip fence will set itself automatically to within +/− 1/10 mm (absolutely accurate – no need to check again). The VARIO drive is also very user-friendly. Using a keypad from the same operating position, you can choose any speed between 2 000 and 6 000 rpm. The colour LCD screen clearly displays the settings chosen. And just so you can size large panels in greater safety and comfort, on/off switches have been fitted to the sliding table.

 



Equipment

Options Pack II

Technical Data

Sliding table cutting lengths

Maximum cutting lengths when using clamping shoe or crosscut-mitre fence. Not in conjunction with crosscut fence, stops to 2 500 mm.

Table length (mm)

2 250

3 000

3 200

3 400

3 800

4 300

5 000

Cutting length (mm)
with or without scoring saw blade

2 155

2 905

3 105

3 305

3 705

3 870
(4 205*)

3 870
(4 905*)

Cutting length (mm) for F 45 ELMO IV
with or without scoring saw blade

2 100

2 850

3 050

3 250

3 650

-

-

TIP-SERVO-DRIVE

Cutting length (mm)
without scoring saw blade

1 840

2 590

2 790

2 990

3 390

3 870

3 870
(4 570*)

Cutting length (mm)
with scoring saw blade

1 725

2 475

2 675

2 875

3 275

3 775

3 775
(4 475*)

* Possible cutting lengths without use of the crosscut fence and cross slide.
Cutting lengths refer to mechanical travel, i. e. from end stop to end stop on the sliding table.

Depth of cut

without scoring saw blade

Saw Blade Diameter (mm)

250

300

315

350

400

450

500

550

Depth of cut vertical (mm)

0-50

0-75

0-82

0-100

25-125

50-150

75-175

100-200

Depth of cut at 45° (mm)

0-33

0-50

0-56

0-70

17-87

34-105

52-123

70-141

with scoring saw blade

Saw Blade Diameter (mm)

250

300

315

350

400

4501)

5001)

-

Depth of cut vertical (mm)

0-50

0-75

0-82

0-100

0-125

25-150

50-175

-

Depth of cut at 45° (mm)

0-33

0-50

0-56

0-70

0-87

16-105

34-123

-

1) If a scoring unit is fitted, the scoring saw blade, incl. front and back flanges, or RAPIDO must be removed.

Space requirements

Your F 45’s space requirements are as below:

A

Cutting width + 330 mm

B

Cutting width + 310 mm

Cutting width + 400 mm

with manual adjustment and DIGIT X

 

for F 45 ELMO III and F 45 ELMO IV

C

Sliding table length + 360 mm

D

Sliding table length + 290 mm

E

Crosscut-mitre fence

Crosscut-mitre fence with DIGIT L

Crosscut-mitre fence F 45 ELMO IV

Crosscut fence up to 3 200 mm

1 970 – max. 3 680 mm

1 970 – max. 3 430 mm

2 130 – max. 3 670 mm

1 800 – max. 3 330 mm

 

Machine weight

depending on configuration 870 kg – 1 170 kg

Table height

910 mm


Further information