Configurator.

Your configuration

Request offer

F 45 Special Options Packs.

Options pack F 45 I

Options pack F 45 I

  • M18123 - Options pack F 45 I

    Rip fence with manual adjustment and digital display/DIGIT X
    Cutting width 1 000 mm, anodized aluminium table width extension
    Screen controls on machine frame
    On/off switches on sliding table
    VARIO/infinitely variable speed adjustment, 2 000 – 6 000 rpm., 5.5 kW (7.5 HP)

Supplements for other cutting widths on the rip fence/DIGIT X

  • M44210 - Cutting width 800 mm, anodized aluminium table width extension

  • M44211 - Cutting width 1 300 mm, anodized aluminium table width extension

  • M44212 - Cutting width 1 600 mm, anodized aluminium table width extension

Options pack F 45 II

Options pack F 45 II

  • M18124 - Options pack F 45 II

    Rip fence with motorised adjustment
    Cutting width 1 000 mm, anodized aluminium table width extension
    Screen controls on machine frame
    On/off switches on sliding table
    VARIO/infinitely variable speed adjustment, 2 000 – 6 000 rpm., 5.5 kW (7.5 HP)

Supplements for other cutting widths on the motorised rip fence

  • M44230 - Cutting width 1 300 mm, anodized aluminium table width extension

  • M44231 - Cutting width 1 600 mm, anodized aluminium table width extension

Options pack F 45 III

Options pack F 45 III

  • M18125 - Options pack F 45 III

    Rip fence with motorised adjustment
    Cutting width 1 000 mm, anodized aluminium table width extension
    Screen controls in eye-level
    Clipboard
    VARIO/infinitely variable speed adjustment, 2 000 – 6 000 rpm., 5.5 kW (7.5 HP)

Supplements for other cutting widths on the motorised rip fence

  • M44230 - Cutting width 1 300 mm, anodized aluminium table width extension

  • M44231 - Cutting width 1 600 mm, anodized aluminium table width extension

F 45 Basic and Optional Equipment.

Operating panel

Eye-level operating panel

  • M64103 - Eye-level operating panel

    incl. preparation for retrofitting scoring unit (Order No. M21000), incl. in options pack F 45 III

Clipboard

  • M62001 - Clipboard

    only in conjunction with eye-level operating panel (Order No. M64103), incl. in options pack F 45 III

Sliding table

Sliding table length

  • M34010 - Table length 2 250 mm

  • M34011 - Table length 3 000 mm

  • M34012 - Table length 3 200 mm

  • M34013 - Table length 3 400 mm

  • M34014 - Table length 3 800 mm

  • M34015 - Table length 4 300 mm

  • M34016 - Table length 5 000 mm

On/off switches on sliding table

  • M37000 - On/off switches on sliding table

    incl. in options pack F 45 I, F 45 II

TIP-SERVO-DRIVE

incl. sliding table Sliding table with servo-drive, incl. infinitely top carriage locking (not in conjunction with on/off switches on sliding table, F 45 ELMO IV and vacuum clamping in the sliding table)

  • M35100 - Table length 2 250 mm/TIP-SERVO-DRIVE

  • M35101 - Table length 3 000 mm/TIP-SERVO-DRIVE

  • M35107 - Table length 3 200 mm/TIP-SERVO-DRIVE

  • M35102 - Table length 3 400 mm/TIP-SERVO-DRIVE

  • M35103 - Table length 3 800 mm/TIP-SERVO-DRIVE

  • M35104 - Table length 4 300 mm/TIP-SERVO-DRIVE

  • M35105 - Table length 5 000 mm/TIP-SERVO-DRIVE

Drive and power ratings, Energie saving

Energy saving package

  • M53050 - to reduce the electricity usage of the machine up to 25 %

    incl. automatic switch off, for 400 V, 50 Hz only

Drive rating and rotational speed

  • M51020 - 5,5 kW (7,5 HP)

    Three speeds, manually adjusted, 3/4/5 000 rpm.

  • M51021 - 5,5 kW (7,5 HP)/VARIO

    VARIO/infinitely variable speed adjustment, 2 000 – 6 000 rpm.,
    increased cutting power, at speeds above 3 000 rpm. The torque available is comparable to that of a 11 kW (15 HP) motor, incl. in options packs F 45 I, F 45 II, F 45 III

  • M51022 - 7,5 kW (10 HP)

    Three speeds, manually adjusted, 3/4/5 000 rpm.

  • M51023 - 11 kW (15 HP)

    Three speeds, manually adjusted, 3/4/5 000 rpm.

Special electrics other than 3 x 400V, 50Hz

  • M5300X - Special electrics other than 3 x 400V, 50Hz

Scoring units

2-axis scoring unit

  • M24000 - 2-axis scoring unit

    with motorised vertical and lateral adjustment Scoring blade height programmable with rapid rise and fall
    Drive motor 0.75 kW (1 HP), 8 200 rpm.
    Retrofitting only possible on machines which are prepared for scoring unit (Order No. M21000)
    (max. saw blade diameter limited to 500 mm)

RAPIDO scoring system

  • M24001 - RAPIDO scoring system

    for 2-axis scoring unit
    incl. saw blade width with infinite cutting width adjustment, from 2.8 to 3.8 mm

3-axis scoring unit RAPIDO Plus

  • M24007 - 3-axis scoring unit RAPIDO Plus

    with motorised vertical, lateral and saw blade width adjustment incl. saw blade
    Scoring blade height programmable with rapid rise and fall, saw blade width display
    Drive motor 0.75 kW (1 HP), 8 200 rpm.
    Retrofitting only possible on machines which are prepared for scoring unit (Order No. M21000)
    (max. saw blade diameter limited to 500 mm)

Spare scoring saw blade

  • M24003 - Spare scoring saw blade

    for RAPIDO scoring system and 3-axis scoring unit/RAPIDO Plus

Preparation for retrofitting scoring unit

  • M21000 - Preparation for retrofitting scoring unit

    incl. in machines with eye-level operating panel (Order No. M64103)

Crosscut and mitre fences

Crosscut-mitre fence with length compensation

  • M44500 - Manual adjustment, stops to 3 500 mm, angles up to 49°

    Distance to stops and angle settable using a measuring scale, with length compensation, incl. 2 flip stops

  • M44501 - with DIGIT L, stops to 3 200 mm

    distance to stops settable by digital display, angle and length compensation settable using a measuring scale, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead

  • M44503 - with DIGIT LD, stops to 3 200 mm

    distance to stops and angle settable by digital display, with integrated length compensation, incl. batteries

Parallelogram cross slide PQS

  • M44509 - with digital display of the angle, stops to 3 500 mm

    Manual adjustment, angle up to 47° with digital display, distance to stops and length compensation for the angle, settable using a measuring scale, incl. 2 flip stops

  • M44510 - with DIGIT L, stops to 3 200 mm

    distance to stops settable by digital display, angle and length compensation settable using a measuring scale, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead

  • M44511 - with DIGIT LD, stops to 3 200 mm

    distance to stops and angle settable by digital display, with integrated length compensation, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead

Crosscut fence, 90° only

manual adjustment

  • M44116 - Stops to 2 500 mm

    settable using a measuring scale

  • M44117 - Stops to 3 200 mm

    settable using a measuring scale

  • M44119 - Stops to 3 200 mm

    settable using a measuring scale, with DIGIT L, distance to stops settable by digital display, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead

Mitre fences

  • M64041 - Single sided mitre fence, stops to 2 500 mm

  • M64104 - DUPLEX, Stops to 1 350 mm

    angle and length settable by scale with magnifying glass, with length compensation (settable using a measuring scale)

  • M64105 - DUPLEX, Stops to 2 150 mm

    angle and length settable by scale with magnifying glass, with length compensation (settable using a measuring scale)

  • M64106 - DUPLEX D, Stops to 1 350 mm

    angle settable by digital display, length and length compensation by measuring scale,
    incl. batteries

  • M64107 - DUPLEX D, Stops to 2 150 mm

    angle settable by digital display, length and length compensation by measuring scale,
    incl. batteries

  • M64108 - DUPLEX DD, Stops to 1 350 mm

    both angle and length settable by digital display with length compensation,
    incl. batteries

  • M64109 - DUPLEX DD, Stops to 2 150 mm

    both angle and length settable by digital display with length compensation,
    incl. batteries

Rip fences

Rip fence

anodized aluminium table width extension

  • M44040 - Manual adjustment, Cutting width 800 mm

    settable using a measuring scale, incl. fine adjustment

  • M44041 - Manual adjustment, Cutting width 1000 mm

    settable using a measuring scale, incl. fine adjustment

  • M44042 - Manual adjustment, Cutting width 1300 mm

    settable using a measuring scale, incl. fine adjustment

  • M44043 - Manual adjustment, Cutting width 1600 mm

    settable using a measuring scale, incl. fine adjustment

  • M44213 - DIGIT X/manual adjustment with digital display, Cutting width 800 mm

    incl. fine adjustment

  • M44214 - DIGIT X/manual adjustment with digital display, Cutting width 1000 mm

    incl. fine adjustment, inkl. in options packet F 45 I

  • M44215 - DIGIT X/manual adjustment with digital display, Cutting width 1300 mm

    incl. fine adjustment

  • M44216 - DIGIT X/manual adjustment with digital display, Cutting width 1600 mm

    incl. fine adjustment

  • M44232 - Motorised adjustment, Cutting width 1000 mm

    incl. in options packs F 45 II, F 45 III

  • M44233 - Motorised adjustment, Cutting width 1300 mm

  • M44234 - Motorised adjustment, Cutting width 1600 mm

Workpiece supports

Main table length extension

anodized aluminium

  • M41005 - 840 mm

  • M41006 - 1200 mm

  • M41007 - 1600 mm, with floor support

  • M41008 - 2000 mm, with floor support

Cross slide extension

  • M64115 - pull out, additional width max. 700 mm

Additional cross slide

  • M64117 - Additional cross slide

    with floor support roller
    for large surface workpieces up to 250 kg
    Recommended floor rail: flat steel, 10 x 60 mm (length = 2 x carriage length + 500 mm)
    Floor rail to be provided by customer

Infeed support table

  • M44300 - Infeed support table

    swing away, positioned in front of the machine table (anodized aluminium)

STEG/second support on the sliding table

  • M64014 - STEG/second support on the sliding table

    Additional work piece support, 400 mm

Clamping systems

Quick-action clamp

  • M64200 - Manual, clamping height 200 mm

  • M64135 - Electro-pneumatic, clamping height 0 – 90 mm with one clamping unit

    with wireless remote control, Compressed air supply to be provided by customer (6 bar)

  • M64137 - Electro-pneumatic, clamping height 0 – 90 mm with two clamping units

    with wireless remote control, Compressed air supply to be provided by customer (6 bar)

  • M64138 - Electro-pneumatic, clamping height 80 – 170 mm with one clamping unit

    with wireless remote control, Compressed air supply to be provided by customer (6 bar)

  • M64139 - Electro-pneumatic, clamping height 80 – 170 mm with two clamping units

    with wireless remote control, Compressed air supply to be provided by customer (6 bar)

Vacuum clamping in the sliding table

  • M64140 - Vacuum clamping in the sliding table

    with 5 individually controlled suction pod sectors, for all sliding table lengths
    additional pairs of suction pods, prices available on request
    (only in conjunction with eye-level operating panel, not in conjunction with TIP-SERVO-DRIVE)

Pneumatic pressure beam

Suitable for thin materials, clamping height to 80 mm
Compressed air supply to be provided by customer (6 bar)

  • M64125 - Sliding table length 2250 mm, clamping length 1975 mm

  • M64126 - Sliding table length 3000 mm, clamping length 2725 mm

  • M64127 - Sliding table length 3200 mm, clamping length 2925 mm

  • M64128 - Sliding table length 3400 mm, clamping length 3125 mm

  • M64129 - Sliding table length 3800 mm, clamping length 3525 mm

Further options

PALIN/parallel cutting device

for fixing to sliding table round bar, adjustable to 940 mm

  • M64010 - settable using a measuring scale

  • M64111 - settable using digital dimension display with fine adjustment, incl. batteries

LASER-cutting line marker

  • M64116 - LASER-cutting line marker

    Beam width approx. 3 mm, beam length approx. 5 m

Coolant spray device

  • M64122 - Coolant spray device

    for processing aluminium and plastics, compressed air supply to be provided by customer (6 bar)

Three phase plug

  • M64123 - Three phase plug

    EURONORM, with separate fuse protection 16 Amp., fixed to machine frame and controlled by main switch

Flip stop

  • M44504 - Additional for all crosscut fences (not available for motorised crosscut-mitre fence)

Further specifications

USB-interface for data transfer

  • M00001 - USB-interface for data transfer

    F 45 ELMO: data and program transfer

Machine diagnostics and operating hours meter

  • M00002 - Machine diagnostics and operating hours meter

Aluminium parts anodized

  • M00003 - Aluminium parts anodized

Clamping shoe, push stick and push block handle

  • M00004 - Clamping shoe, push stick and push block handle

Your Altendorf F 45 – configured especially for you.

Your configuration

Please send me offer details for this machine.


* Your data will of course be treated confidentially and will not be passed on to third parties.