Configurator.
Your configuration
Request offerF 45 ELMO III Basic and Optional Equipment.
Operating panel
Eye-level operating panel
M64103 - Eye-level operating panel
incl. preparation for retrofitting scoring unit (Order No. M21000), incl. in options pack F 45 III
Clipboard
M62001 - Clipboard
only in conjunction with eye-level operating panel (Order No. M64103), incl. in options pack F 45 III
Sliding table
Sliding table length
M34010 - Table length 2 250 mm
M34011 - Table length 3 000 mm
M34012 - Table length 3 200 mm
M34013 - Table length 3 400 mm
M34014 - Table length 3 800 mm
M34015 - Table length 4 300 mm
M34016 - Table length 5 000 mm
On/off switches on sliding table
M37000 - On/off switches on sliding table
incl. in options pack F 45 I, F 45 II
TIP-SERVO-DRIVE
incl. sliding table Sliding table with servo-drive, incl. infinitely top carriage locking (not in conjunction with on/off switches on sliding table, F 45 ELMO IV and vacuum clamping in the sliding table)
M35100 - Table length 2 250 mm/TIP-SERVO-DRIVE
M35101 - Table length 3 000 mm/TIP-SERVO-DRIVE
M35107 - Table length 3 200 mm/TIP-SERVO-DRIVE
M35102 - Table length 3 400 mm/TIP-SERVO-DRIVE
M35103 - Table length 3 800 mm/TIP-SERVO-DRIVE
M35104 - Table length 4 300 mm/TIP-SERVO-DRIVE
M35105 - Table length 5 000 mm/TIP-SERVO-DRIVE
Drive and power ratings, Energy saving
Drive rating and rotational speed
M51021 - 5,5 kW (7,5 HP)/VARIO
VARIO/infinitely variable speed adjustment, 2 000 – 6 000 rpm.,
increased cutting power, at speeds above 3 000 rpm. The torque available is comparable to that of a 11 kW (15 HP) motor, incl. in options packs F 45 I, F 45 II, F 45 IIIM51025 - 11 kW (15 HP)
Three speeds, manually adjusted, 3/4/5 000 rpm.M51024 - 7,5 kW (7,5 HP)
Three speeds, manually adjusted, 3/4/5 000 rpm.
Special electrics other than 3 x 400V, 50Hz
M5300X - Special electrics other than 3 x 400V, 50Hz
Energy saving package
M53050 - to reduce the electricity usage of the machine up to 25 %
incl. automatic switch off, for 400 V, 50 Hz only
Scoring units
2-axis scoring unit
M24000 - 2-axis scoring unit
with motorised vertical and lateral adjustment Scoring blade height programmable with rapid rise and fall
Drive motor 0.75 kW (1 HP), 8 200 rpm.
Retrofitting only possible on machines which are prepared for scoring unit (Order No. M21000)
(max. saw blade diameter limited to 500 mm)
RAPIDO scoring system
M24001 - RAPIDO scoring system
for 2-axis scoring unit
incl. saw blade width with infinite cutting width adjustment, from 2.8 to 3.8 mm
3-axis scoring unit RAPIDO Plus
M24007 - 3-axis scoring unit RAPIDO Plus
with motorised vertical, lateral and saw blade width adjustment incl. saw blade
Scoring blade height programmable with rapid rise and fall, saw blade width display
Drive motor 0.75 kW (1 HP), 8 200 rpm.
Retrofitting only possible on machines which are prepared for scoring unit (Order No. M21000)
(max. saw blade diameter limited to 500 mm)
Spare scoring saw blade
M24003 - Spare scoring saw blade
for RAPIDO scoring system and 3-axis scoring unit/RAPIDO Plus
Preparation for retrofitting scoring unit
M21000 - Preparation for retrofitting scoring unit
incl. in machines with eye-level operating panel (Order No. M64103)
Crosscut and mitre fences
Crosscut-mitre fence with length compensation
M44500 - Manual adjustment, stops to 3 500 mm, angles up to 49°
Distance to stops and angle settable using a measuring scale, with length compensation, incl. 2 flip stopsM44501 - with DIGIT L, stops to 3 200 mm
distance to stops settable by digital display, angle and length compensation settable using a measuring scale, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging leadM44503 - with DIGIT LD, stops to 3 200 mm
distance to stops and angle settable by digital display, with integrated length compensation, incl. batteries
Parallelogram cross slide PQS
M44509 - with digital display of the angle, stops to 3 500 mm
Manual adjustment, angle up to 47° with digital display, distance to stops and length compensation for the angle, settable using a measuring scale, incl. 2 flip stopsM44510 - with DIGIT L, stops to 3 200 mm
distance to stops settable by digital display, angle and length compensation settable using a measuring scale, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging leadM44511 - with DIGIT LD, stops to 3 200 mm
distance to stops and angle settable by digital display, with integrated length compensation, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead
Crosscut fence with fixed 90° angle
manual adjustment
M44116 - Stops to 2 500 mm
settable using a measuring scaleM44117 - Stops to 3 200 mm
settable using a measuring scaleM44119 - Stops to 3 200 mm
settable using a measuring scale, with DIGIT L, distance to stops settable by digital display, incl. 2 flip stops, fine adjustment, rechargeable batteries and charging lead
Flip stop
M44504 - Flip stop
Additional for all crosscut fences
(not available for motorised crosscut-mitre fence)
Mitre fences
M64041 - Single sided mitre fence, stops to 2 500 mm
M64104 - DUPLEX, Stops to 1 350 mm
angle and length settable by scale with magnifying glass, with length compensation (settable using a measuring scale)M64105 - DUPLEX, Stops to 2 150 mm
angle and length settable by scale with magnifying glass, with length compensation (settable using a measuring scale)M64106 - DUPLEX D, Stops to 1 350 mm
angle settable by digital display, length and length compensation by measuring scale,
incl. batteriesM64107 - DUPLEX D, Stops to 2 150 mm
angle settable by digital display, length and length compensation by measuring scale,
incl. batteriesM64108 - DUPLEX DD, Stops to 1 350 mm
both angle and length settable by digital display with length compensation,
incl. batteriesM64109 - DUPLEX DD, Stops to 2 150 mm
both angle and length settable by digital display with length compensation,
incl. batteries
Rip fences
Rip fence
anodized aluminium table width extension
M44232 - Motorised adjustment, Cutting width 1000 mm
incl. in options packs F 45 II, F 45 IIIM44230 - Motorised adjustment, Cutting length 1 300 mm, supplement on 1 000 mm
M44231 - Motorised adjustment, Cutting length 1 600 mm, supplement on 1 000 mm
Workpiece supports
Main table length extension
anodized aluminium
M41005 - 840 mm
M41006 - 1200 mm
M41007 - 1600 mm, with floor support
M41008 - 2000 mm, with floor support
Cross slide extension
M64115 - pull out, additional width max. 700 mm
Additional cross slide
M64117 - Additional cross slide
with floor support roller
for large surface workpieces up to 250 kg
Recommended floor rail: flat steel, 10 x 60 mm (length = 2 x carriage length + 500 mm)
Floor rail to be provided by customer
Infeed support table
M44300 - Infeed support table
swing away, positioned in front of the machine table (anodized aluminium)
STEG/second support on the sliding table
M64014 - STEG/second support on the sliding table
Additional work piece support, 400 mm
Clamping systems
Quick-action clamp
M64200 - Manual, clamping height 200 mm
M64135 - Electro-pneumatic, clamping height 0 – 90 mm with one clamping unit
with wireless remote control, Compressed air supply to be provided by customer (6 bar)M64137 - Electro-pneumatic, clamping height 0 – 90 mm with two clamping units
with wireless remote control, Compressed air supply to be provided by customer (6 bar)M64138 - Electro-pneumatic, clamping height 80 – 170 mm with one clamping unit
with wireless remote control, Compressed air supply to be provided by customer (6 bar)M64139 - Electro-pneumatic, clamping height 80 – 170 mm with two clamping units
with wireless remote control, Compressed air supply to be provided by customer (6 bar)
Vacuum clamping in the sliding table
M64140 - Vacuum clamping in the sliding table
with 5 individually controlled suction pod sectors, for all sliding table lengths
additional pairs of suction pods, prices available on request
(only in conjunction with eye-level operating panel, not in conjunction with TIP-SERVO-DRIVE)
Pneumatic pressure beam
Suitable for thin materials, clamping height to 80 mm
Compressed air supply to be provided by customer (6 bar)
M64125 - Sliding table length 2250 mm, clamping length 1975 mm
M64126 - Sliding table length 3000 mm, clamping length 2725 mm
M64127 - Sliding table length 3200 mm, clamping length 2925 mm
M64128 - Sliding table length 3400 mm, clamping length 3125 mm
M64129 - Sliding table length 3800 mm, clamping length 3525 mm
Further options
Flip stop
M44504 - Additional for all crosscut fences (not available for motorised crosscut-mitre fence)
PALIN/parallel cutting device
for fixing to sliding table round bar, adjustable to 940 mm
M64010 - settable using a measuring scale
M64111 - settable using digital dimension display with fine adjustment, incl. batteries
LASER-cutting line marker
M64116 - LASER-cutting line marker
Beam width approx. 3 mm, beam length approx. 5 m
Coolant spray device
M64122 - Coolant spray device
for processing aluminium and plastics, compressed air supply to be provided by customer (6 bar)
Three phase plug
M64123 - Three phase plug
EURONORM, with separate fuse protection 16 Amp., fixed to machine frame and controlled by main switch
Further specifications
USB-interface for data transfer
M00001 - USB-interface for data transfer
F 45 ELMO: data and program transfer
Machine diagnostics and operating hours meter
M00002 - Machine diagnostics and operating hours meter
Aluminium parts anodized
M00003 - Aluminium parts anodized
Clamping shoe, push stick and push block handle
M00004 - Clamping shoe, push stick and push block handle
Altendorf Cut Optimisation
Pack 1: A 45-OPTI
M63106 - Pack 1: A 45-OPTI
incl. interface kit M63006 ARDIS-Optimisation for up to 500 workpieces per optimisation cycle Any number of panel types with three sizes of panel for each one, grain direction and mitre cuts are taken into account, incl. Altendorf postprocessor, only in conjunction with F 45 ELMO III or F 45 ELMO IV, not included in the price: operator training, connection to customer PC, software installation
Pack 2: Option-S
M63111 - Pack 2: Option-S
Add-on module for ARDIS-Optimisation, allows precutting into oversize strips using a beam saw, final sizing of each strip is carried out separately on the Altendorf sliding table saw
Pack 3: A4-Label
M63112 - Pack 3: A4-Label
Add-on module for ARDIS-Optimisation, label printing on to A4 sheets
Pack 4: Online-Label
M63113 - Pack 4: Online-Label
Add-on module for ARDIS-Optimisation, printing of parts labels directly at the machine onto endless rolls, as soon as the machine is set up for the final cut of a workpiece, the corresponding label is printed, label design according to customer specifications: price on request, the printer and the data connection to the PC are not included in the price
Label printer Zebra LP2844 with feed hopper, incl. printer console
M63120 - Label printer Zebra LP2844 with feed hopper, incl. printer console
Reliable thermal printer, 203 dpi, max. carrier width 108 mm Connections: USB, Parallel Centronics, Serial Not included in the price: operator training, installation of the printer, individual connection of the printer to customer PC
Label roll with 1000 labels
M63121 - Label roll with 1000 labels
W=80 mm, H=50,9 mm, labels leave no residue on removal
A4 label sheets with 16 labels per sheet, 500 sheets per box
M63123 - A4 label sheets with 16 labels per sheet, 500 sheets per box
labels leave no residue on removal
Interface kit for connection to cut optimisation programs
M63006 - Interface kit for connection to cut optimisation programs
For cut optimisation programs which are equipped with an Altendorf postprocessor, consists of 50 m connection cable, barcode-reader with accessories and RS485-interface, only in conjunction with F 45 ELMO III or F 45 ELMO IV, not included in the price: commissioning of the machine, operator training and connection of the machine to customer PC